Experts say that the three main sections of the flushing toilets are the waste line, sewer, and soil stack. Whether you want to believe them or not, that’s your choice. But think about it, don’t you see that all these three sections are vulnerable to blockages? Well if they are then, the experts are simply right!
There are so many factors that will influence obstructions for the flushing toilets. This includes what you put inside the toilet and how often you clean your toilet lines. But most especially how your vents function will also be very important. Flushing toilets like the name suggests are toilets that can be flushed after use.
Nonetheless, once a blockage starts to develop, you will see very quick growth as the flow of your flushing toilets are often interfered with. They become slow and thus encourage debris to settle along the line. This is the main reason why you should take preventive measurements. Here a few tips that you could start with today.
Flush the Right Things through the Toilet
Rags, sanitary pads, baby diapers, toys, broken objects, and hair are some of the most notorious materials when it comes to blocking the lines for many flushing toilets in our homes. They can easily clog or expand in the many different sections of the toilet lines and block them. Therefore avoid using your toilet as a garbage can.
Flushing Toilets Vents Should be Clear
Without clear vents you will have insufficient air flow. When this happens it will only mean one thing – that the line to your flushing toilets slow down and encourages debris to settle. To keep the vents clear, you can climb over the roof and pull any debris away from the vent before spraying water through them using a garden hose.
Flush all the Toilets in the House at Once
Flushing all the toilets simultaneously allows the water force from all the toilets to enter the drain at the same time. This will easily dislodge the debris and encourage the lines to be cleaned up. At the end of it all the flow will be perfect and you could sleep with any worries of blockages. It is advisable that you do this procedure once a month.
Keep the Side Sewer Free of Any Roots
The side sewer is the one that extends from the home drainage to the main sewer system. This sewer is often more prone to root incursion especially if it is an old system. If you allow this to happen, roots can easily grow quickly and cause blockages. This could mean disaster for you. Have a professionally to check your sewer often.
Have a Maintenance Routine for your Toilet
Don’t wait until your toilet is clogged to call in a professional plumber, no! The best thing to do is have a routine plumber check up. Expert plumbers are able to point potential problems and address them immediately. Doing this will make sure that you spend less on maintenance as opposed to when your toilet is already clogged up.
How to Keep off Odor from Your Flushing Toilets
Apart from the preventive measures that we have seen you might also want to keep off any forms of stench. Some flushing toilets are often full of stench such that staying in such an environment becomes quite impossible. Here is what you can do.
- Keep all your vents clear always.
- Make sure you flush the toilet after use.
- Have a cleaning program for your toilet.
- Use the right toilet cleaner for your system
- Make sure your bathroom exhaust fan works.
- Spray air fresheners on a routine basis too.
- Read through posts to find the best DIY procedures.
- Ask experts to come along and advise you on what to do.
- Materials that are not toilet friendly should be kept off the drain.
- Check your system for any forms of burst ups or leakages
The most important thing for any flushing toilet is to ensure that it works efficiently. With such efficiency your toilet should be able to fight the stench alone and also keep safe from any forms of blockages.